| Type: | Tube |
|---|---|
| Diameter: | ≥22" |
| Tire Design: | Bias Belted Tyre |
| Certification: | DOT, ISO, ECE, CCC, CE |
| Tread Pattern: | Dual Purpose Tread Pattern |
| Kind: | Vacuum Tire |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Warranty of OTR Radial tyres:
♠ What is covered and for how long?
This limited warranty covers all OTR radial tires provided by us. The limited warranty is in effect for 5 years commencing on the date of Bill of Lading(B/L). If proof of the purchase date is not available, the date of manufacture indicated on the serial number will be uesd as the warranty commencement date.
♠ Warranty limitations:
This limited warranty is applicable to the original purchaser.
Any OTR radial tires, no matter how well manufactured, may fall in service of otherwise become unserviceable due to conditions beyond th control of the manufactures. This limited wattanty is under no circumstances a representation that a tyre failure cannot occur.
The limited warranty gives you specific rights and you may also have other rights which may vary from jurisdiction to jurisdiction. To the extent that the provisions of any applicable such term or terms shall be accordingly replaced, eliminated, amended to extended, as the case may be, in accordance with such legisiation.
♠ Measure of remaining tread depth:
1. Vernier caliper(or professional caliper) is used, when mesuring, avoiding the wearing mark. Any the vernier caliper(or professional caliper) must be vertical to the bottom of groove.
2. The position of measure: Groove depth of middle line on the tread or depth of the leading groove nearest to the tread center.
3. Avoid the strengthening veins and position of wearing mark when measuring.
4. Calculation of tread depth: measure the depth of four equal indexes on the tread cirle, and the average value of the four data is regarded as the remaining tread depth.
♠ What is not covered by this warranty?
The following are not covered by this policy:
1. Tires purchased more than 5 years prior to presentation. Without proof of the B/L date, tires manufactured more than 5 years prior to presentation are not covered.
2. Tyres sold as a blemish(B grade tyres: the first letter of brand is moved).
3. Tires for which an alternate warranty/guarantee has been negotiated.
The tread wear and damage will not covered by the limited warranty influenced by the following conditions:
1. Damaged resulting from misuse, improper mounting, misapplication, use if non-approved rims, improper inflation, overloading, running flat, misalignment of imbalanced of wheels/rims, defective brakes of shock absorbers, abuse, willful damage, oil, chemical action, fire or other externally generated heat, use of studs, water or other material entrapped inside the tire, vehicle damage or road hazards (such as rock cuts, punctures, cut separations, impacts, flex breaks).
2. Claims for irregular wear or rapid tread wearout are not vovered by this limited warranty.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}